Thinuna IP-9636TB III One-button alarm (help) intercom terminal

Features:Self-diagnosis of network failure status, and display the status reported to the server, the key light is lit when the device is connected to the server;"One-key help" function: pre

  • Model No.: IP-9636TB III
  • Name: One-button alarm (help) intercom terminal
  • Standard: CE ; RoHS

Features:

  • Self-diagnosis of network failure status, and display the status reported to the server, the key light is lit when the device is connected to the server;

  • "One-key help" function: press the intercom button, you can talk to the intercom microphone (master and sub-control microphone) set by the "Management Center" software, press and hold the button for 3 seconds to activate this function.

  • Intercom channel transfer: When the main intercom microphone is busy, it can be transferred to the sub-intercom microphone, intercom transfer time: standard 10 seconds, can be self-defined.

  • Built-in 2 * 15W output class D amplifier, can be connected to two 8Ω passive speakers.

  • IPPA function: when there is no intercom task, the connected external speaker can be used as a broadcasting speaker to play the broadcasting content set by the "Management Center" software.

  • Positioning beeps: When installing and configuring the device, the "IP Setup Tool" software enables the positioning command, and the device triggers a beep to inform the location of the device.

  • Remote Upgrade: When the new firmware of the device is released, use the "IP Upgrade Tool" software to upgrade the firmware of the device.

 

 Specification:

Model

 IP-9636TB III

Network port

RJ45,10M/100M port,support 24V poe

Power

24VDC

Support protocols

TCP/IP,UDP,IGMP,FTP,ICMP,ARP, supports cross-gateway and cross-route configuration

Audio format

PCM(uncompressed format),ADPCM,MP3,WAV

Intercom transfer time

standard 10 seconds, can be self-defined

Reboot time for disconnected from the network or power supply

Less than 1 second

Transmission rate

10/100Mbps

Audio mode

Network packets, CD sound quality

Amplifier Frequency Response

20Hz~20KHz

T.H.D.

≤1%

SNR

>90dB

Built-in speaker output impedance and rated power

4Ω,3W

Built-in amplifier

2*15W, 8ohms, D class

Mic Input Sensitivity

1.5mV.

Operating temperature

-20℃~+60℃

Working humidity

10%~90%

Power consumption

≤40W

Power source

DC24V or 24VPOE

Dimensions

117(W) × 38(D) × 194(H) mm

Weight

1kg

 


Tel
Products
Inquiry