Thinuna IP-300AP III SC/IP-450AP III SC/IP-600AP III SC Network single-channel digital power amplifier

Features:Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.Network fault self-diagnosis, network and service status disp

  • Model No.: Network single-channel digital power amplifier
  • Name: IP-300AP III SC/IP-450AP III SC/IP-600AP III SC
  • Standard: CE,ROHS


Features:

  • Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.

  • Network fault self-diagnosis, network and service status display. Compatible with SIP protocol, Onvif protocol.

  • Can convert digital audio signals on the network into analog audio signals.

  • Single-channel independent digital amplifier; built-in limiter.

  • European style terminal block input and output.

  • When a fire signal is activated, the corresponding channel will automatically output a passive contact signal for controlling other linkage equipment.

  • Special power amplifier detection function, the network can monitor the status of power amplifier in real time.

  • The digital amplifier is suitable for 70 / 100V line installations (selectable via dip switches).

  • Each channel has volume control and LED indicators (signal, clipping and protection).

  • Power output (70/100V): 300W / 450W / 600W.

Specifications:

Model

IP-300AP III SC

IP-450AP III SC

IP-600AP III SC

Network interface

Standard RJ45, 10M/100M network port, network port comes with upgrade function

Support protocols

TCP, UDP, IGMP, ICMP, ARP, compatible with SIP protocol, Onvif protocol.

Audio format

PCM(uncompressed format), ADPCM, MP3

Standby

No signal 2 minutes automatic standby

Restart recovery time of power and network disconnection

<1s

Network delay

File playback: less than 50ms, real-time speech: less than 100ms

Transmission rate

10/100Mbps

Audio mode

Network data packet

Amplifier frequency response

100HZ~15KHZ

Harmonic distortion

≤0.3%

Amplifier SNR

>95db

Line input sensitivity

0.9-1.1V (0+/-1dBV)

Local input impedance

20k (balanced),  10k (unbalanced)

Control output

Passive trigger output

Operating temperature

-20℃~+60℃

Operating humidity

10%~90%

Amplifier power

300W

450W

600W

Power consumption

≤20W (without load)

Input power supply

AC220V/50Hz AC110V/60Hz

Dimensions

482(W) × 44(H) × 360(D)(mm)

 


Tel
Products
Inquiry