Features:Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.Network fault self-diagnosis, network and service status disp
Features:
Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.
Network fault self-diagnosis, network and service status display.
Connected through the network to form a distributed system, the network management center software provides comprehensive control and management of the devices in the system.
With emergency mode, all power outputs can be turned on or off immediately in case of emergency.
The power of each channel can be turned on or off manually or through software control.
The power can be turned on and off sequentially, either manually or through software control.
The timing interval for sequentially turning the power on or off can be set.
The power port of each channel can be timing programmed to achieve unattended power management of the whole system.
Eight-CH power supply output with a set of editable on and off program controls, and program editing using an innovative behavior learning model.
Each channel has an independent key switch and status indication, providing users with maximum flexibility.
With keyboard password lock function to prevent misoperation and facilitate user management.
LCD screen display with comprehensive power status indication.
With TCP/IP network control and standard RS485 serial numerical control interface, open control protocol to meet third party control.
With perfect equipment configuration and real-time control and monitoring functions.
With DC12V output, I/O level control input, closed contact control, and cascade output port.
Real-time monitoring of input voltage and output current, providing 2 levels of over-voltage and over-current protection functions, divided into sound and light alarm and cut-off protection. Each level of protection voltage and current value is set by users according to their needs, which maximally ensures the power safety of users' equipment.
The whole machine configuration 40A air switch, each channel using 10A national standard five-hole socket (optional universal plug), 30A relay control, suitable for high-power use occasions.
Optional 20A purification filter module.
19-inch, 1U standard chassis. Thickened aluminum alloy panel.
Specification:
Model | IP-9608SP III |
Network interface | Standard RJ45, 10M/100M network port, network port comes with upgrade function |
Support protocols | TCP, UDP, IGMP, ICMP, ARP |
Transmission rate | 10/100Mbps |
Network delay | Less than 100ms |
Power input | AC 110V / AC 220V |
Function | Behavior learning mode programming, automatic timing control, single-channel key control, serial port control |
safety protection | 40A air switch, current and voltage alarm protection |
Total capacity | Max. 40A |
Output | Output channel 1-8, 10A, national standard five-hole socket (optional universal socket); DC12V (1A) |
Panel control | 8-channel control, SET, KEY, ON/OFF buttons |
Control interface | RS485 serial port, REM IN level control interface, STATUS status output port, +12V control voltage output port, Ethernet port. |
Power status display | LCD screen display |
Purification filter | (Optional) Rated current 20A; complies with European CISPR, US FCC standards. |
Software function | Parameter setting, timing programming, real-time control, real-time monitoring |
Weight | 5.2kg |
Dimensions | 483 × 182 × 44mm (W×D×H) |
