Features:Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.Network fault self-diagnosis, network and service status disp
Features:
Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.
Network fault self-diagnosis, network and service status display. Compatible with SIP protocol, Onvif protocol.
Can convert digital audio signals on the network into analog audio signals.
2-channel independent digital power amplifier; built-in limiter.
European style terminal block input and output.
When a fire signal is activated, the corresponding channel will automatically output a passive contact signal for controlling other linkage equipment.
Special power amplifier detection function, the network can monitor the status of power amplifier in real time.
The digital amplifier is suitable for 70 / 100V line installations (selectable via dip switches).
Power output (70/100V) : 2X150W / 2X300W / 2X450W/ 2X600W.
Specification:
Model | IP-2150AP III SC | IP-2300AP III SC | IP-2450AP III SC | IP-2600AP III SC |
Network interface | Standard RJ45, 10M/100M network port, network port comes with upgrade function | |||
Support protocols | TCP, UDP, IGMP, ICMP, ARP, compatible with SIP protocol, Onvif protocol. | |||
Audio format | PCM(uncompressed format), ADPCM, MP3 | |||
Number of network channels | Network port corresponds to amplifier 1 and 2 channels | |||
Standby | No signal 2 minutes automatic standby | |||
Restart recovery time of power and network disconnection | <1s | |||
Network delay | File playback: less than 50ms, real-time speech: less than 100ms | |||
Transmission rate | 10/100Mbps | |||
Audio mode | Network data packet | |||
Frequency response | 100HZ~15KHZ | |||
Harmonic distortion | ≤0.3% | |||
SNR | >95db | |||
Line input sensitivity | 0.9-1.1V (0+/-1dBV) | |||
Local input impedance | 20k (balanced) , 10k (unbalanced) | |||
Control output | Two-channel passive trigger output | |||
Operating temperature | -20℃～+60℃ | |||
Operating humidity | 10%～90% | |||
Amplifier power | 2*150W | 2*300W | 2*450W | 2*600W |
Power consumption | ≤40W (without load) | |||
Input power supply | AC220V/50Hz AC110V/60Hz | |||
Dimensions | 482(W) × 44(H) × 360(D)(mm) | |||
