Thinuna IP-4150AP III SC/IP-4300AP III SC/IP-4450AP III SC/IP-4600AP III SC Network Four-Channel Digital Amplifier

Features:Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.Network fault self-diagnosis, network and service status disp

  • Model No.: IP-4150AP III SC/IP-4300AP III SC/IP-4450AP III SC/IP-4600AP III SC
  • Name: Network Four-Channel Digital Amplifier
  • Standard: CE ; RoHS

Features:

  • Any place with an Ethernet port can be accessed, and it can accept the access and control of servers and other IP network devices.

  • Network fault self-diagnosis, network and service status display.

  • Dual network port design; network port 1 corresponds to amplifier 1 and 2 channels; network port 2 corresponds to amplifier 3 and 4 channels. Compatible with SIP protocol, Onvif protocol.

  • Can convert digital audio signals on the network into analog audio signals.

  • 4-channel independent digital power amplifier; built-in limiter.

  • European style terminal block input and output.

  • When a fire signal is activated, the corresponding channel will automatically output a passive contact signal for controlling other linkage equipment.

  • Special power amplifier detection function, the network can monitor the status of power amplifier in real time.

  • The digital amplifier is suitable for 70 / 100V line installations (selectable via dip switches).

  • Each channel has volume control and LED indicators (signal, clipping and protection).

  • Power output (70/100V) : 4X150W / 4X300W / 4X450W / 4X600W.


Specification:

Model

IP-4150AP III SC

IP-4300AP III SC

IP-4450AP III SC

IP-4600AP III SC

Network interface

Standard RJ45, 10M/100M network port, network port comes with upgrade function

Support protocols

TCP, UDP, IGMP, ICMP, ARP, compatible with SIP protocol, Onvif protocol.

Audio format

PCM(uncompressed format), ADPCM, MP3

Number of network channels

Network port 1 corresponds to amplifier 1 and 2 channels; network port 2 corresponds to amplifier 3 and 4 channels.

Standby

No signal 2 minutes automatic standby

Restart recovery time of power and network disconnection

<1s

Network delay

File playback: less than 50ms, real-time speech: less than 100ms

Transmission rate

10/100Mbps

Audio mode

Network data packet

Frequency response

100HZ~15KHZ

Harmonic distortion

≤0.3%

SNR

>95db

Line input sensitivity

0.9-1.1V (0+/-1dBV)

Local input impedance

20k (balanced) ,  10k (unbalanced)

Control output

Four-channel passive trigger output

Operating temperature

-20℃~+60℃

Operating humidity

10%~90%

Amplifier power

4*150W

4*300W

4*450W

4*600W

Power consumption

≤80W (without load)

Input power supply

AC220V/50Hz AC110V/60Hz

Dimensions

482(W) × 44(H) × 360(D)(mm)


Tel
Products
Inquiry