Thinuna IP-9611AOT NETWORK BACKUP TERMINAL(100V backup input)

It comes with a dual port hub (HUB) that can be directly connected to a local area network (LAN) or wide area network (WAN) to play network audio and to accept the access and control of servers and other IP network devices.

  • Model No.: IP-9611AOT
  • Name: NETWORK BACKUP TERMINAL(100V backup input)
  • Standard: CE,ROHS

9611AOT-2.jpg

Function Description


  • It comes with a dual port hub (HUB) that can be directly connected to a local area network (LAN) or wide area network (WAN) to play network audio and to accept the access and control of servers and other IP network devices.

  • Network fault self-diagnosis, network and server communication status display

  • Powerful network audio playback function, can be used independently in the network, can directly play network audio signals from IP network audio matrix, IP network radio head or IP network CD.

  • It has a backup constant pressure broadcast input port and can be connected to the traditional constant pressure broadcast signal as a backup. When the local IP system fails, it can automatically switch to the traditional constant pressure broadcast to realize uninterrupted broadcast.

  • With power-off straight-through function, when the device is powered off, it can automatically switch to the traditional constant pressure broadcast.

  • The backup terminal can accept the control of the server in the main control room and the computer in the sub-control points, and it can also be separated from the server and directly accept the direct control of internal communication intercom equipment such as network fire matrix and network paging microphone. It can respond more quickly and reliably to emergency tasks such as paging intercom or firefighting.

  • It can match the channel selector and can arbitrarily select and listen to the audio programs of multiple sets of audio channels transmitted at the same time. The audio channel program can come from the server or from the audio matrix or IP network radio and IP network CD.

  • Line and microphone volume control, total volume control and high and low sound control.

  • Built-in 15Wx2 digital power amplifier, constant resistance output, can be equipped with constant resistance speaker, low temperature rise, safe and reliable, suitable for long hours of work.

  • When there is no signal, it can automatically enter the standby state, saving energy and environmental protection.

Specification :

Model No.

IP-9611AOT

Network interface

2*RJ45(100/1000)  1*RJ45(update port)

Supporting  Protocol

TCP/IP,UDP,IGMP,FTP,ICMP,ARP,SUPPORT CROSS-GATEWAY,CROSS-ROUTER CONFIGURATION, with offline function

Audio format

PCM(LOSSLESS COMPRESSION FORMAT),ADPCM,MP3,WAV,OGG

standby

No signal 3minute automatic standby ,standby time can be set up by user

Power off, network failure restart recovery time

less than 1 second

Network delay

File playback:<50ms,real-time speech:<50ms,with automatic caching function

Transmission rate

10/100Mbps

Audio mode

Network packet, CD sound quality

Frequency response

20Hz~16KHz

THD

≤0.3%

SNR

>75dB

Line input level

250mV RCA

Microphone input sensitivity

1*10mV(MIC)

Local audio input interface

1*MIC ,      1*line input

Rated output

2*15W fixed-resistance output

Working temperature

-20℃~+60℃

Working humidity

10%~90%

Power consumption

≤50W

Power supply

AC220V/50Hz

Dimension

200(W)×180(D)×70(H)(MM)

Weight

1.8Kg


Tara +86 13724011793
Tel
Products
Inquiry