Function Description:l Can be accessed to any ethernet port,comes with dual hub (HUB), can accept access and control from server or other IP network device.l Network fault self-diagnosis,
Function Description:
l Can be accessed to any ethernet port,comes with dual hub (HUB), can accept access and control from server or other IP network device.
l Network fault self-diagnosis, network and service status display.
l 8 channel of fire signal detection port, supports 24V DC signal and short circuit signal(relay contact short circuit) to trigger the alarm.
l Can be used as a signal acquisitioner , to work with the server to perform different zone to play different music.
l Can be used with the network master station to achieve the corresponding one-key paging function.
l With the out-of-sever running function, can directly start the terminals to active the emergency mode to play fire alarm broadcasting, this device can work without the sever, the fire alarm broadcasting will be more faster, more secure and reliable.
Specification:
Model | IP-9621EM |
Network interface | 2*RJ45(10/100M)1*RJ45(Update port) |
Supporting protocol | TCP/IP,UDP,IGMP,FTP,ICMP,ARP,SUPPORTS CROSS-GATEWAY,CROSS-ROUTER CONFIGURATION,WITH OUT-OF-SEVER FUNCTION. |
Audio format | PCM(LOSSLESS COMPRESSION FORMAT), ADPCM, MP3,WAV,OGG |
Output | With the out-of-sever running function |
Input channel | 8CH input ,DC12V-24V ,short-circuit contact signal (0V) |
Output channel | 8CH input (work with sever) |
Power off, network failure restart recovery time | <1S |
Transmission rate | 10/100Mbps |
Alarm response | <0.1S |
Alarm music | Stored in the local SD card ,can be downloaded from the server through the network,4G(Standard) |
Working temperature | -20℃~+60℃ |
Working humidity | 10%~90% |
Power consumption | ≤20W |
Power supply | AC220V/50Hz |
Dimension ( W x D x H ) | 482 x 165 x 44 (MM) |
Net weight | 2.2Kg |
File | Language | Versions | Size | Format |
EN | V1.1 | 237KB | DWG | |
EN | V1.1 | 2.98MB | ||
CN | V1.1 | 2.95MB |
